Lightning Enterprises Home > Products > Redwing Lathe > Lathe Accessories
 

26A Parts & Accessories
for your Red Wing Lathe

 

For Pricing Please Visit Our New Websitr - Click Here

Lightning Enterprises features parts & accessories to make your 26A Red Wing lathe more productive. From arbors and chucks to tapered spindles for buffing wheels, we have the tools to increase your lathe capacity.
 


No. 7 Tapered Spindle
The No.7 Tapered Chuck is designed specifically for use with buffing wheels, brushes and lead center wheels. Precision manufactured of alloy steel, this chuck is built for placement onto lathes and polishing motors containing standard tapered shafts.

No. 7 Tapered Spindle

 
     
     
   

 

 

20CAF Spindle w/ Arbor and Flange
The 20CAF Spindle with Arbor and Flange can be used with any accessory requiring a tapered spindle or an accessory with an arbor hole. Precision manufactured of alloy steel, this chuck is built for placement onto lathes and polishing motors with a 1/2" or 5/8" straight shaft. Specify Right or Left side.

20CAF Tapered Spindle

 
     
     
     

 

20AF Arbor and Flange
The 20AF Arbor and Flange can be used with any accessory arbor hole. Precision manufactured of alloy steel, this chuck is built for placement onto lathes and polishing motors with a 1/2" or 5/8" straight shaft.

20AF Arbor & Flange

 
     
     
     

 

Redwing 8T chuck Right Side 

No. 8T Chuck (standard chuck)
The 8T Chuck is designed specifically for use with small burs and mandrels that do not exceed 1/4" in diameter. The 8T is available for the RIGHT side only and opens and closes with just a twist. Dimensions: 2.25" L x 1" Diameter. For use on tapered shaft only.
NOTE: RIGHT side only

#8T Chuck

   
     

Redwing 8T Chuck Left Side 

No. 8T-L Chuck (Special order LEFT side chuck)
The 8T-L Chuck is designed specifically for use with small burs and mandrels that do not exceed 1/4" in diameter. The 8T -L is a special order part available for the LEFTside only and opens and closes with just a twist. Dimensions: 2.25" L x 1" Diameter. For use on tapered shaft only.
NOTE: LEFT side only

#8T-L Chuck

 
     

No. 47.205 Chuck
The 47.205 Chuck is designed specifically for use with small burs and mandrels which do not exceed 5/32" in diameter. The 47.205 is available for the RIGHT side only and opens and closes with just a twist.
NOTE: Right side only.

47.205 Chuck

 
     


No. 18 Precision Chuck
The No.18 Atlas Precision Chuck is a precise "Jacobs Type" chuck for use with accessories having a diameter of .001" to .250". The No. 18 attaches to the right side of the polisher onto standard tapered shafts. Machined to precision limits, the 18 provides the technician with concentricity unmatched by any other adjustable chuck.
NOTE: RIGHT side only.

No.18 Precision  Chuck